RC Brand RTR - Traxxas

VXL-6s™ Waterproof Electronic Speed Control 6s LiPo compatible Integrated cooling fan Real-time telemetry via Traxxas Link™ 3-LED status indicators Powered accessory ports 10-gauge silicone wire Integrated protection circuits Velineon® 2000 kV Brushless Motor 4-pole 2000 kV 5 mm output shaft Finned can for better heat dissipation...

Clipless Stadium Truck Body Tough LED-ready front and rear bumpers Includes wheelie bar Aerodynamic body with rear wing Body reinforcements to prevent pull-through damage Holds tight for intense action Quick and easy removal Smooth appearance with no body posts or clips BL-2s™ Waterproof Electronic...

Tires & wheels, assembled, glued (2.8") (RXT black wheels, Gravix™ tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

MODEL SPECS Model Name: 4-Tec Drift Model Type: On-Road Cars Model Type: On-Road Cars Model Type: On-Road Cars Model Type: On-Road Cars Model Skill Level: 1 Scale: 1/10 Weight: 3.35 pounds (1.52 kg) Length: 18.24 inches (463 mm) Width: 7.91 inches (201 mm) Front...

Clipless Monster Truck Body Tough LED-ready front and rear bumpers Includes wheelie bar Body reinforcements to prevent pull-through damage Holds tight for intense action Quick and easy removal Smooth appearance with no body posts or clips BL-2s™ Waterproof Electronic Speed Control Heat sink accepts...

Propeller, 42x59mm (steel)/ M4x0.7 NL (1) (requires installation of #5742X aluminum rudder mount for Spartan® SR)  

Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification  

Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)  

Tires & wheels, assembled, glued (Ford Raptor R black chrome wheels, BFGoodrich® All-Terrain™  T/A® KO2 tires, foam inserts) (2) (4WD front/rear, 2WD rear)  

Transmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (includes Titan® 87T motor)

LED light set, front & rear, complete (includes light harness, 1.6x5mm BCS (self-tapping) (4), zip ties (2)) (fits #9712 body)

Upgrade your Mini's front differential with this machined steel 12-tooth pinion gear. The pinion gear works with the standard 47-tooth ring gear to provide extra strength and durability.

Bulkhead (front) (black)

Chassis Top Brace

Slipper clutch rebuild kit includes steel discs (2), friction inserts (2), 4 mm locknut, and spring washers (2)

MODEL SPECS Model Name: Spartan SR Race Boat Model Type: Boats Model Speed: 50+ mph with two 3-cell LiPo batteries Model Skill Level: 2 Scale: 1/10 Weight: 5.29 pounds (2.39 kg) Length: 40.8 inches (1037 mm) Width: 9.5 inches (243 mm) Height: 7.2 inches...

Drive cup, steel, extreme durability (1)/ 3x8mm CS (use only with #7750X & 7896 driveshafts) (machined, heat treated)

Pinion gear, differential (12/47 ratio) (rear) (requires #10757, 10857 or 10858 center driveshaft with either #10758 slipper clutch or #10760 center differential) Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)

Low-profile Gravix® race tires are built to run hard on pavement or in the wild. The directional tread pattern runs quieter than traditional off-road tires with excellent traction and a thick center carcass to prevent ballooning at high speed. The tires come pre-assembled and glued...