1/10 Dumont Front/Rear 2.8" MT Tires Mounted 12mm Blk Raid (2)

This is a pair of pre-mounted Dumont 2.8" Tires on Raid Black 6x30 Removable 12mm Hex Wheels. Are you ready for the most extreme 2.8" Paddle tires Pro-Line has ever made for 1:10 Monster Truck? Introducing the Dumont 2.8" tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!

The Dumont 2.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:10 Monster Truck today!

Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.

The Dumont 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable 12mm Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes) or even upgrading your wheels to 14mm (PRO634700 Sold Separately) or 17mm wheel hexes (PRO633600 Sold Separately) for extreme use! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere!

Please note: All tires & wheels are sold in pairs, unless otherwise noted

PRO1019310 | Dumont 2.8" Sand/Snow Tires Mounted on Raid Black 6x30 Removable 12mm Hex Wheels (2) for Stampede® 2wd & 4wd Front and Rear